How to Connect B Hyve to Wifi?

The B-hyve is one of the most popular irrigation controllers on the market. If you’re looking to upgrade your current system, or install a new one, connecting it to WiFi is a great way to get started.

  • Download the B-hyve app from the App Store or Google Play store
  • Open the app and create an account
  • Tap “Add a Device” in the bottom right corner of the dashboard screen
  • Select your device type (B-hyve Smart Hose Faucet Timer)
  • Follow the on-screen instructions to connect your device to Wi-Fi and finish set up in the app

Pairing the Orbit B-Hyve Wifi Timer

How Do I Connect My B Hyve Orbit to Wi-Fi?

To connect your B HYVE orbit to Wi-Fi, you will need to first ensure that your device is within range of a compatible wireless router. Once it is, open the app and go to Settings > Add Device. Select ‘Orbit’ from the list of devices and follow the on-screen instructions to complete the process.

Why is My B-Hyve Wont Connect to Wi-Fi?

If you’re having trouble connecting your B-hyve to Wi-Fi, there are a few things you can check to troubleshoot the issue. First, make sure that your B-hyve is within range of your router and that there are no obstructions between the two. If you’re still having trouble, try resetting your B-hyve by pressing and holding the reset button for 10 seconds.

You should also check to see if your router is on the supported list of routers for the B-hyve. If you’re still having trouble after trying all of these things, please contact customer support for further assistance.

How Do I Reset My B-Hyve Wi-Fi Hub?

If you need to reset your B-hyve Wi-Fi hub, there are a few different ways to do it. The first way is to simply unplug the power cord from the back of the unit and then plug it back in. This will cause the unit to reboot and should reset any Wi-Fi settings that may be causing problems.

Another way to reset your B-hyve is by pressing and holding the reset button on the back of the unit for about 10 seconds. This will also cause the unit to reboot, but will also factory reset all settings on the device. This means that you will need to reconfigure any custom settings that you have previously set up, such as Wi-Fi passwords or port forwarding rules.

If neither of these methods work, you can also try logging into the web interface for your B-hyve and going into the “Maintenance” section. From here, you should see an option to “Reboot Device.” This will again cause a full reboot of your B-hyve and shouldreset any problematic settings.

Read Also:   How to Extend Wifi to Detached Garage?

How Do I Connect Orbit B-Hyve to My Phone?

Assuming you would like a step-by-step guide on connecting your Orbit B-hyve to your phone: 1. Purchase the Orbit B-hyve indoor timer at your local store or online (link below). 2. Download the free app for iOS or Android.

3. Create an account within the app and login. 4. Tap “Add Timer” in the bottom right corner of the app home screen and select “B-hyve WiFi Timer” from the list of supported products. If you have more than one B-hyve timer, tap the + sign in the top right corner to add additional timers.

5a. To connect your B-hyve to WiFi using Bluetooth, open the back cover of your timer and press and hold down both the “A” button (upper left) and “B” button (lower left) until you hear a beep followed by two sets of flashes on LEDs 1 & 2 that alternate between fast and slow blinks (~15 seconds). The unit will now enter WiFi setup mode indicated by all 4 LEDs flashing rapidly (~20 times/minute).

The default name (SSID) of your unit will be “BhvXXXXXX” where XXXXXX is specific to your individual unit – please write this down for use later in this process! You can then go back into the app, select your timer, and choose your home WiFi network from the list of available networks – no password required! After choosing your network, wait ~30 seconds while it connects and shows as “Online” in green next to Network Status within device settings in the app before proceeding with step 6 below… OR 5b.

To connect without using Bluetooth, open up any web browser on any laptop or desktop computer connected to YOUR HOME WIFI NETWORK ONLY* and type 19216811 into address bar at top – this should bring up a page titled Welcome to B‑hyve Smart Indoor Timer! If not, check that you are only connected to YOUR HOME WIFI NETWORK before proceeding further…Click on Wireless Setup Wizard which is located directly beneath where it says Firmware Version xxxxxxx – if prompted with a warning about changing router settings click OK since we just want to temporarily change ONE setting back after completing these steps anyway.

How to Connect B Hyve to Wifi?

Credit: www.orbitonline.com

B-Hyve Not Connecting to Wifi

If you’re having trouble connecting your B-Hyve to your home’s wifi network, there are a few things you can try. First, make sure that the B-Hyve is powered on and within range of your router. Then, open the B-Hyve app and go to Settings > Wifi.

From here, you should see a list of available networks. If your home network is not listed, try refreshing the page. Once you’ve selected your home network, enter the password and hit connect.

If you’re still having trouble connecting, it’s possible that your router’s firewall is blocking the B-Hyve from accessing the internet. To fix this, you’ll need to login to your router’s settings and add an exception for the B-Hyve’s IP address (192.168.1.245).

Read Also:   Why Do I Have 2 Wifi Networks?

How to Reset B-Hyve Wifi

If you need to reset your B-Hyve wifi, follow these simple steps: 1. Open the B-Hyve app and go to the settings menu. 2. Tap on the “Reset Wifi” option.

3. Enter your wifi password when prompted and tap “OK”. 4. Your B-Hyve will now be reset and ready to connect to your new wifi network!

B-Hyve Wifi Hub

B-Hyve Wifi Hub The B-Hyve wifi hub is the beating heart of your B-Hyve smart sprinkler system. It’s what allows you to control your irrigation from anywhere using the B-Hyve app on your smartphone or tablet.

The wifi hub also gives you access to advanced features like weather intelligence and integrations with Amazon Alexa and Nest. In this post, we’ll take a closer look at the B-Hyve wifi hub and how it can benefit your lawn watering efforts. The B-Hyve wifi hub connects to your home’s internet router via ethernet cable and creates a secure network for your B-Hyve devices.

Once connected, you’ll be able to use the B-Hyve app to control your sprinklers from anywhere with an internet connection. The app lets you set up automatic schedules, adjust run times, monitor moisture levels, and more. You can also use the app to manually activate your sprinklers if needed (great for those pesky brown spots!).

In addition to giving you remote access to your irrigation system, the B-Hyve wifi hub also unlocks some great advanced features. One of our favorites is weather intelligence. With this feature enabled, your sprinklers will automatically adjust their run times based on current conditions like rainfall, wind speed, humidity, and temperature.

This helps ensure that your lawn is getting just the right amount of water – no more guessing or overwatering! Another great feature enabled by the wifi hub is integration with Amazon Alexa and Nest devices. This allows you to control your sprinklers using voice commands or automate them based on Nest’s energy saving settings.

As you can see, the B-Hyve wifi hub is a powerful little device that can make a big impact on your lawn watering efforts! If you’re not already using one, we highly recommend picking one up (you can find them here). And if you have any questions about setting up or using the wifi hub, feel free to reach out to us – we’re always happy to help!

Conclusion

B-hyve is a smart irrigation controller that can be connected to your home’s Wi-Fi network. This allows you to control the sprinkler system from your smartphone, tablet or computer. In order to connect B-hyve to Wi-Fi, you will need the following items:

• B-hyve controller • Router with an active Internet connection • Smart device (smartphone, tablet or computer) with the B-hyve app installed

To connect B-hyve to Wi-Fi, follow these steps: 1. On your router, create a new 2.4 GHz wireless network with WPA/WPA2 encryption. 2. Enter the SSID and password for this new network into the B-hyve app.

3. Select “Add Controller” in the app and enter the serial number of your B-hyve controller when prompted. 4. Follow the onscreen instructions to complete the connection process.

Leave a Comment